Size specification of galvanized sheet
The relevant product standards state the recommended standard thickness, length and width of galvanized sheet and their allowable deviations.
Dimension specification
The relevant product standards state the recommended standard thickness, length and width of galvanized sheet and their allowable deviations. Generally speaking, the thicker the galvanized sheet is, the greater the allowable error is, rather than the fixed 0.02-0.04 mm. The thickness deviation is also based on the yield, tensile coefficient and other different requirements. The length and width deviation is generally in 5mm, and the thickness of the plate is generally between 0.4-3.2.
specification | Zinc layer | material |
0.20*1000*C | 80 | DX51D+Z |
0.25*1000*C | 80 | DX51D+Z |
0.3*1000*C | 80 | DX51D+Z |
0.35*1000*C | 80 | DX51D+Z |
0.4*1000*C | 80 | DX51D+Z |
0.5*1000*C | 80 | S280GD+Z |
0.5*1000*C | 80 | DX51D+Z |
0.58*1000*C | 80 | S350GD+Z |
0.6*1000*C | 80 | DX51D+Z |
0.7*1000*C | 80 | DX51D+Z |
0.75*1000*C | 80 | DX51D+Z |
0.8*1000*C | 80 | DX51D+Z |
0.8*1000*C | 80 | DX53D+Z |
0.85*1000*C | 80 | DX51D+Z |
0.9*1000*C | 80 | DX51D+Z |
0.98*1000*C | 80 | DX51D+Z |
0.95*1000*C | 80 | DX51D+Z |
1.0*1000*C | 80 | DX51D+Z |
1.1*1000*C | 80 | DX51D+Z |
1.2*1000*C | 80 | DX51D+Z |
1.2*1050*C | 150 | CSB |
1.4*1000*C | 80 | DX51D+Z |
specification | Zinc layer | material |
1.5*1000*C | 80 | DX51D+Z |
1.55*1000*C | 180 | S280GD+Z |
1.55*1000*C | 180 | S350GD+Z |
1.6*1000*C | 80 | DX51D+Z |
1.8*1000*C | 80 | DX51D+Z |
1.9*1000*C | 80 | DX51D+Z |
1.95*1000*C | 180 | S350GD |
1.98*1000*C | 80 | DX51D+Z |
1.95*1000*C | 180 | S320GD+Z |
1.95*1000*C | 180 | S280GD+Z |
1.95*1000*C | 275 | S350GD+Z |
2.0*1000*C | 80 | DX51D+Z |
specification | Zinc layer | material |
0.36*1250*C | 80 | |
0.4*1250*C | 80 | DX51D+Z |
0.42*1250*C | 80 | DX51D+Z |
0.45*1250*C | 225 | S280GD+Z |
0.47*1250*C | 225 | S280GD+Z |
0.5*1250*C | 80 | SGCC |
0.55*1250*C | 180 | S280GD+Z |
0.55*1250*C | 225 | S280GD+Z |
0.6*1250*C | 80 | DX51D+Z |
0.65*1250*C | 180 | DX51D+Z |
0.7*1250*C | 80 | DX51D+Z |
0.7*1250*C | 80 | SGCC |
0.75*1250*C | 80 | DX51D+Z |
0.8*1250*C | 80 | DX51D+Z |
0.9*1250*C | 80 | DX51D+Z |
0.95*1250*C | 80 | DX51D+Z |
specification | Zinc layer | material |
1.0*1250*C | 80 | DX51D+Z |
1.15*1250*C | 80 | DX51D+Z |
1.1*1250*C | 80 | DX51D+Z |
1.2*1250*C | 80 | DX51D+Z |
1.35*1250*C | 80 | DX51D+Z |
1.4*1250*C | 80 | DX51D+Z |
1.5*1250*C | 80 | DX51D+Z |
1.55*1250*C | 80 | DX51D+Z |
1.6*1250*C &l |
